SKU Selene L-Shaped Banquette Seating

Selene L-Shaped Banquette Seating

View product specification
Count along Selene’s pale grey seat and three pads sit in a line. The fourth changes direction under a square corner of navy channels.

Your specification

Customise Selene
Finishes
Add measurements
Measurements (cm)
Layout and corners

Enter the first run and the return. Choose the turn you need as you face the seats.

View quote cart

Discuss my project

Product specification

Dimensions

Overall dimensions H × W × D (cm)Approx. H 100 × W 360 × D 180 cm
Seat height (cm)Approx. 48 cm

Pictured finishes

Seat cushions Ash vinyl
Inside backrest Stargazer fabric
Outer back and ends American Antique finish
Feet Black Texture finish
Apron panelsPanels in a brown timber finish
Commercial details
Lead time8-10 weeks
Warranty5 Years
Product weightApprox. 180 kg Frame construction
StyleContemporary
Suitable applicationsSuitable for Restaurant corner seating, Cafe banquette seating, Hotel dining areas, Club dining areas, Guest reception seating.
Care and materials
Finish detailLow-satin pale grey seats; matte dark backs; low-sheen brown woodgrain; satin-black feet
Available colours View all materials
Commercial Fabric RangeSpecify commercial fabric rated for 35,000–50,000 Martindale cycles. Fabric abrasion
COM / COLCustomer’s Own Material (COM) and Customer’s Own Leather (COL) are available on request.
Care and maintenance Care guide

About Selene

Set the shorter left return against your measured floor plan first. On the pictured corner banquette it projects about 180 cm overall, while the long banquette bench spans approximately 360 cm. That relationship matters if the return also forms the edge of a guest reception area.

Read full description

Ash vinyl and Stargazer fabric give the reinforced bench two distinct commercial-grade surfaces. The low satin sheen on the cushions brings out the matte texture of the back. Below, the grain of the American Antique timber finish runs across the apron and up the left end. The short black feet lift the base clear of the floor. Between pads, paired feet mark two of the joins.

For restaurant banquette seating in an L-shaped dining booth, you can carry one fabric along both runs or use different commercial coverings on the seats and backs. Send us your layout for custom banquette seating in a café, hotel or club dining room. We deliver Australia-wide, including Southport and Broadbeach on the Gold Coast.

  • Asymmetric L-shaped configuration
  • Return projects at front-view left
  • Square inside corner
  • Four visible seat-pad regions
  • Narrow vertical back channels