SKU Mason Bench Seating

Mason Bench Seating

View product specification Custom details

Select a covering for Mason’s raised bolster, a separate one for its three seat cushions and a finish for the rails and uprights. Its straight profile suits a hotel lounge or reception area.

Your specification

Customise Mason
Finishes
Add measurements
Measurements (cm)
Layout and corners

Enter the length your seating run needs. Add a return if the project requires one.

View quote cart

Discuss my project

Product specifications

Overall dimensions H × W × D (cm)Approx. H 79 × W 165 cm
Seat height (cm)Approx. 48 cm
Commercial fabric rangeSpecify commercial fabric rated for 35,000–50,000 Martindale cycles. Fabric abrasion
COM / COLAvailable on request. COM (Customer's Own Material) and COL (Customer's Own Leather) options allow full customisation.

Product Details

Seat cushionSedona - Stormfront vinyl
Backrest faceAlto - Cascade fabric
Exposed frame / rails / legsQuarter Sawn White Oak - Honey finish
StyleContemporary
Suitable applicationsHotel lounges; Reception areas; Restaurant waiting areas

Materials as pictured

Seat cushion: Sedona - Stormfront vinyl; Backrest face: Alto - Cascade fabric; Exposed frame / rails / legs: Quarter Sawn White Oak - Honey finish

Finish detailLow-sheen grained seats, subdued woven bolster and softly lustrous honey-toned timber.
Available coloursView all materials

Care & Maintenance

Care guide

Discuss my project

About Mason Bench Seating

Choose the upholstery for Mason’s three seat cushions and its single raised bolster, then select a finish for the exposed rails and supports. The straight, armless bench seating suits hotel lounges, reception areas and restaurant waiting rooms.

The three rectangular cushions on the pictured restaurant bench seating sit above a continuous front rail, divided by two narrow joints and nearly filling the rail width. Each has a shallow crown, rounded upper corners, deep front boxing and tan piping along the seat top. Behind them, one raised bolster runs the full width in a single piece, with a rounded crown and lower edge. Its upholstered ends sit slightly inboard of the outer seat edges, and a short rectangular timber detail projects from its left end as pictured. Open space separates the bolster from the seats and the rail from the floor.

The rear view shows two timber uprights rising from the floor, crossing the outer face of the rear rail and continuing into the bolster. From the front, the floor contacts appear slightly farther apart than the upper stems, and the long rail overhangs both. As commercial bench seating, it measures about 165 cm wide and 79 cm high, with a seat height of about 48 cm.

As pictured, Stormfront vinyl on the seat cushions has a fine branching grain and a low sheen. Teal yarns stand out against a darker ground in the Cascade fabric on the bolster. A Honey finish follows the front rail and the exposed faces of the supports.

B Seated Global supplies venues in Brisbane. Request a quote.

Request a Render

BSG will prepare and return your render.

* Required

Place in My Space

BSG will place your furniture into your venue photo.

Venue photo
No image selected
JPEG, PNG or WebP, up to 8 MB.

* Required