SKU Bennett Bench Seating

Bennett Bench Seating

View product specification Custom details

Bring a separate seat cover, buttoned-back upholstery and frame finish to Bennett’s straight bench.

Your specification

Customise Bennett
Finishes
Add measurements
Measurements (cm)
Layout and corners

Enter the length your seating run needs. Add a return if the project requires one.

View quote cart

Discuss my project

Product specifications

Overall dimensions H × W × D (cm)Approx. H 120 × W 195 × D 65 cm
Seat height (cm)Approx. 76 cm
Product weightApprox. 45 kg (preparation estimate; actual weight unverified) Frame construction
Commercial fabric rangeSpecify commercial fabric rated for 35,000–50,000 Martindale cycles. Fabric abrasion
COM / COLAvailable on request. COM (Customer's Own Material) and COL (Customer's Own Leather) options allow full customisation.
Arm heightApprox. 100 cm

Product Details

Seat cushionThomas Maxwell Langham - Chestnut leather
Backrest faceThomas Maxwell Langham - Chestnut leather
Exposed frame / rails / legsQuarter Sawn White Oak - Onyx finish
StyleTraditional
Suitable applicationsIndoor hospitality interiors; Hotel bar seating areas; Pub and club interiors; Restaurant bar areas; Traditional reception settings

Materials as pictured

Seat cushion: Thomas Maxwell Langham - Chestnut leather; Backrest face: Thomas Maxwell Langham - Chestnut leather; Exposed frame / rails / legs: Quarter Sawn White Oak - Onyx finish

Finish detailSoft-sheen brown upholstery, olive arm pads, satin warm-brown timber grain and brass-coloured nailheads.
Available coloursView all materials

Care & Maintenance

Care guide

Discuss my project

About Bennett Bench Seating

Specify the cover on Bennett’s diamond-buttoned back and select a separate seat covering for your restaurant bench. The exposed rails, turned legs and spindle sides can take a timber finish from your project palette. Bennett is a straight upholstered bench with one continuous seat, a broad diamond-buttoned back with rounded upper corners, and open spindle arms. Three turned front legs divide the base into two open spans. This bench seating suits hotel bars, clubs and traditional reception areas.

For restaurant bench seating, the pictured section measures about 120 cm high, 195 cm wide and 65 cm deep, with a seat height of about 76 cm. The front is broad and symmetrical, roughly 1.6 times wider than tall, and the arms sit below the crown of the back. The seat and back face are covered in chestnut leather with a soft sheen, while the arm caps are padded in olive. Thirty-one covered buttons sit in staggered rows of 10, 11 and 10 across the back, and brass-coloured nailheads trim the lower front of the seat and the arm pads.

The frame finish on this commercial bench seating shows a satin, warm brown timber grain. Each arm has three turned spindles and a shaped front upright. The front legs have square upper blocks, ringed turning, tapered shafts and rounded feet, and a low stretcher runs behind the central front leg. A deep seat front sits over a narrow exposed rail.

B Seated Global supplies venues in Sydney. Request a quote.

Request a Render

BSG will prepare and return your render.

* Required

Place in My Space

BSG will place your furniture into your venue photo.

Venue photo
No image selected
JPEG, PNG or WebP, up to 8 MB.

* Required