SKU Avery Booth Seating

Avery Booth Seating

View product specification Custom details

Specify Avery’s seat, apron and back in separate finishes. In the pictured booth, Raisin vinyl wraps around the rounded seat edge and meets Gold as the front turns vertical below the curve.

Your specification

Customise Avery
Finishes
Add measurements
Measurements (cm)
Curved layout

Describe the sweep or radius you need, or include a drawing reference in the note.

View quote cart

Discuss my project

Product specifications

Overall dimensions H × W × D (cm)Approx. H 90 × W 260 cm
Seat height (cm)Approx. 46 cm
Commercial fabric rangeSpecify commercial fabric rated for 35,000–50,000 Martindale cycles. Fabric abrasion
COM / COLAvailable on request. COM (Customer's Own Material) and COL (Customer's Own Leather) options allow full customisation.

Product Details

Seat cushion and rounded front edgeUltimax Vintage - Raisin vinyl
Backrest faceMaclaren - Paprika fabric
Vertical front apronAntique - Gold vinyl
StyleContemporary
Suitable applicationsRestaurant booth dining; Hotel lounges; Club dining areas; Bar seating areas

Materials as pictured

Seat cushion and rounded front edge: Ultimax Vintage - Raisin vinyl; Backrest face: Maclaren - Paprika fabric; Vertical front apron: Antique - Gold vinyl

Finish detailSatin chestnut seat, diffuse flecked back cloth, subtly mottled gold apron and low-sheen black plinth.
Available coloursView all materials

Care & Maintenance

Care guide

Discuss my project

About Avery Booth Seating

Choose the covering for Avery’s curved seat independently of its apron and channelled back. Raisin vinyl wraps the seat cushions and rolls over the rounded front edge, Gold vinyl begins just below the bend where the front turns vertical, and Paprika polyester blend fabric covers the channelled back. This booth seating is a broad inward-curving run with an open centre and two forward-projecting terminals, and it suits restaurant booth dining and hotel lounges.

The back rises substantially above the seat and finishes in a softly scalloped crest, with broad upright channels following the arc. The woven Paprika cloth has lighter yarn flecks and also covers the full-height terminal caps beside the lower end panels. Finer radial ribs roll over the seat's rounded nose, while the Gold apron is fluted along the inner curve and plain at the ends. A slim, low-sheen black plinth sits beneath. For contemporary restaurant booths, the crisp colour break through the centre and at both ends gives the run a defined edge.

Avery measures approximately 260 cm wide between its outer ends and 90 cm high, with a seat height of about 46 cm. Used as restaurant booth seating, it gives a dining group one continuous curve to sit within. Its two projecting ends also suit club dining rooms and bar seating areas.

The pictured combination is one option. The seat cushion, backrest face and upholstered base or apron can each be covered in a chosen fabric, vinyl or leather, so the booth upholstery can be matched to the venue one part at a time.

B Seated Global supplies venues on the Gold Coast. Request a quote.

Request a Render

BSG will prepare and return your render.

* Required

Place in My Space

BSG will place your furniture into your venue photo.

Venue photo
No image selected
JPEG, PNG or WebP, up to 8 MB.

* Required